BK Diesel Service - 6750 Chopper

Agricultural Diesel Solutions HP9020 power module for 10.5L and 12.5L John Deere engines.

Why spend thousands of dollars more for a different piece of equipment with more horsepower when you can simply tune your engine to achieve optimal output levels in as little as ten minutes?

This module provides a fully adjustable tuning option for your equipment allowing you to see gains in both horsepower and torque from a range of 15% to 30% over stock levels. This means you can pull bigger implements and cover more acres per hour saving you time and hundreds of dollars on fuel expenses! What is even better is this module is guaranteed for life so the warranty never expires! Give it a try today and see just how far the extra benefits and savings can take you.

This module fits many makes and models so if you are not using one piece of equipment, you can simply unplug it and plug it into something else you are using! See the complete list of applications below:

 

Make	Model	Engine	Year
John Deere	6710 Chopper	12.5L John Deere
John Deere	6750 Chopper	12.5L John Deere
John Deere	6810 Chopper	12.5L John Deere
John Deere	6850 Chopper	12.5L John Deere
John Deere	9200 Tractor	10.5L John Deere Engine
John Deere	9220 Tractor	12.5L John Deere
John Deere	9300 Tractor	12.5L John Deere
John Deere	9320 Tractor	12.5L John Deere
John Deere	9400 Tractor	12.5L John Deere
John Deere	9420 Tractor	12.5L John Deere
John Deere	9520 Combine	12.5L John Deere
John Deere	9620 Tractor	12.5L John Deere

 

Agricultural Diesel Solutions HP9020 power module for 10.5L & 12.5L John Deere engines.

Why spend thousands of dollars more for a different piece of equipment with more horsepower when you can simply tune your engine to achieve optimal output levels in as little as ten minutes?

This module provides a fully adjustable tuning option for your equipment allowing you to see gains in both horsepower and torque from a range of 15% to 30% over stock levels. This means you can pull bigger implements and cover more acres per hour saving you time and hundreds of dollars on fuel expenses! What is even better is this module is guaranteed for life so the warranty never expires! Give it a try today and see just how far the extra benefits and savings can take you.

This module fits many makes and models so if you are not using one piece of equipment, you can simply unplug it and plug it into something else you are using! See the complete list of applications below:

 

 

Make	Model	Engine	Year
John Deere	6710 Chopper	12.5L John Deere
John Deere	6750 Chopper	12.5L John Deere
John Deere	6810 Chopper	12.5L John Deere
John Deere	9200 Tractor	10.5L John Deere Engine
John Deere	9220 Tractor	12.5L John Deere
John Deere	9300 Tractor	12.5L John Deere
John Deere	9320 Tractor	12.5L John Deere
John Deere	9400 Tractor	12.5L John Deere
John Deere	9420 Tractor	12.5L John Deere
John Deere	9520 Tractor	12.5L John Deere
John Deere	9620 Tractor	12.5L John Deere
John Deere	9820 Tractor	12.5L John Deere
John Deere	9860 Combine	12.5L John Deere

 

Stock replacement injector. Comes with the gaskets needed for installation and a 12 month warranty.

CROSS REFERENCE PART NUMBERS

• 631001
• EX631001
• SE501954
• RE63052
• RE68665
• RG27867

***You must choose from one of the two core options to purchase this product.***

• Select No Core Charge and you will just be charged the price of the injector. With this option, your new injector will not be shipped until we receive a good core from you.
• Select With Core Charge and you will be charged the initial price of the injector, plus an additional $200ea for the core. Your new injector will be shipped out to you immediately and you will have 30 days to return a good core and receive credit back to your card.

Stock replacement injector. Comes with the gaskets needed for installation and a 12 month warranty.

CROSS REFERENCE PART NUMBERS

• SE501955
• EX631009
• RE504468
• RE505262
• RG29930
• RG33957

***You must choose from one of the two core options to purchase this product.***

• Select No Core Charge and you will just be charged the price of the injector. With this option, your new injector will not be shipped until we receive a good core from you.
• Select With Core Charge and you will be charged the initial price of the injector, plus an additional $225ea for the core. Your new injector will be shipped out to you immediately and you will have 30 days to return a good core and receive credit back to your card.

John Deere Tuning Chip: Power Manager Performance Downloader

**JOHN DEERE TUNING CHIPS WILL WORK ON MOST JOHN DEERE ELECTRONIC MACHINES, NOT JUST TRACTORS!! CALL US TODAY TO SEE WHAT WE CAN DO FOR YOU!!**

Finally, a John Deere tuning chip with custom tuning options is now available to the ag market! This custom John Deere tuning chip comes with a touch screen handheld unit that holds the original stock file plus two custom written files specifically calibrated to your machine! This is nothing like the standard pressure box chips you are used to dealing with. You will notice a significant difference in switching from a standard box chip to this new tuner! Using this John Deere tuning chip will give you the power and fuel economy that you always wanted from your machine and all while doing it safely!

Use less fuel per acre - Complete more acres per hour - No need to purchase bigger machines

Before you buy a new tractor to accommodate the power demands of a new plow, planter, or other implement, you should consider saving money by uprating your current equipment. Up-rating not only adds value and capability to your current tractor, but has a minimal impact to the equipments reliability. John Deere tuning chips provided by Power Manager now offers engine up-rates that achieve new power levels without replacing your current tractor, saving you the need to buy a higher powered model.

Our up-rates increase power over the entire operating range of the engine. Usually this allows the use of a higher gear and 2-300 less RPM which translates to fuel savings. Furthermore, the extra power allows for higher ground speed where applicable - allowing you to cover more acres per hour.

Reliability is a major concern for us. Weve done engine calibration analysis on all of the models in your series. We know what it takes for the manufacturer to get more power. We use that as our road map to keep powertrains operating within the safe limits set out by the manufacturer for use in their higher end models utilizing similar powertrains. Furthermore, our product has no wires or connectors that will corrode over time. It keeps your tractor looking completely factory stock.

Check out the John Deere tuning chip demo video by clicking the following link: http://youtu.be/lx_Gt4R9RVM

**********REQUIRED INFORMATION WHEN ORDERING**********

• Machine Year
• Machine Series
• Machine Model Number
• Machine Serial Number
• Machine additional details or setup
• Machine uses - what do you use it for the most

**********JOHN DEERE TUNING CHIPS WILL NOT WORK ON ALL MACHINES-CALL TO VERIFY YOUR APPLICATION BEFORE ORDERING**********

High/Low Beam, Includes: Stainless Steel Hardware, Connector & Adapter. Replaces OEM Part Number: AL75338

Claas Combine Light. Will also fit some Massey Ferguson tractors with high visibility cabs, and John Deere Forage Harvesters. Oversized Aluminum Heatsink, Aluminum Bezel, Direct fit. Replaces OEM Part Numbers: AZ41570, 3713134M91

RE500186 Racor primaty fuel filter.

Applications:

• John Deere Tier 2 Engines

Cross Reference Part Numbers:

• RE500186
• PFF5579

RE507284 Racor primary fuel filter.

Applications:

• John Deere Tier 2 650 Engines

Cross Reference Part Numbers:

• RE507284
• PFF56170

New OEM replacement starter for John Deere applications.  This starter is a 12 volt, 11 tooth starter that rotates clockwise.  This starter is covered under a 1 year warranty.

CROSS REFERENCE PART NUMBERS

• SE501403
• RE69704
• RE70957
• RE70975
• RE501294
• RE501298
• SND0398
• TY24439
• 91-29-5458
• 18018
• 190-890A
• 228000-653
• 228000-6530
• 228000-6531
• 228000-6532
• 228000-7870
• 228000-7871
• 228000-7873
• TG228000-6532

PRODUCT DESCRIPTION

INTELLIGENT ENGINE TECHNOLOGY

INCREASED POWER AND TORQUE, USING FUEL INJECTION OPTIMIZATION. PRECISION. ACHIEVED. STEINBAUER.

The desired performance enhancement is achieved by changing the injection duration, the same way the system was originally designed to operate. This also allows precise fuel control throughout the full rpm range of the engine. Injection duration is achieved by adding pulse width to a signal, (i.e. at end of injection). This is not changing timingthats best left to the factory ECU. Our module also does not interfear with common rail pressure making our module the best choice for your engine.

So what is the benefit of all this Intelligent Technology for your vehicle? Our module gives up to an additonal 20% increase in power and torque, giving you greater towing power and making overtaking effortless and safer.

Simply smarter. Simply safer. Simply STEINBAUER.

THERE IS NO SUBSTITUTE FOR QUALITY

WE ARE THE ENGINE ADDITIONAL PERFORMANCE ELECTRONIC SPECIALISTS.CHOOSE THE BRAND THAT YOU CAN TRUST. CHOOSE STEINBAUER.

There are many products on the market today that claim to increase power and torque. Buzz words like chip tuning, chipping or flashing are technologies of the past, products that increase rail pressure are simplistic technology, that provides additional power by increasing rail pressure this can cause major engine failure.

If you are looking for a quality product, that has been tried, tested and sold worldwide then there is only one. STEINBAUER has been producing additional performance electronics for over 15 years, we develop, test and manufacture every product in our range. Quite simply there is no substitute for quality.

• tested & sold worldwide, operating in all climates & conditions
• robust constriction, dust, moisture and vibration resistant
• no interference to existing vehicle parts service intervals remain unchanged.
• quality European engineering and components
• easy installation
• no boost or increase in rail pressure
• backed by a worldwide support network
• 3 year warranty

This module fits many makes and models so if you are not using one piece of equipment, you can simply unplug it and plug it into something else you are using! See the complete list of applications below:

JOHN DEERE 10.5L & 12.5L

• 6750
• 6850
• 6950
• 9200
• 9300
• 9400

Stock replacement Garrett reman turbo. Comes with the gaskets needed for installation and a 12 month warranty.

CROSS REFERENCE PART NUMBERS

• SE502205
• RE68937
• RE500163
• RE70703
• RE68936
• RE69677
• RE69007
• RE68875
• RE500014
• 177286
• 477286
• 466923-0003
• 466923-9003
• 466923-5003

***You must choose from one of the two core options to purchase this product.***

• Select No Core Charge and you will just be charged the price of the turbo. With this option, your new turbo will not be shipped until we receive a good core from you.
• Select With Core Charge and you will be charged the initial price of the turbo, plus an additional $200 for the core. Your new turbo will be shipped out to you immediately and you will have 30 days to return a good core and receive credit back to your card.

NEW stock replacement Borg Warner turbo. Comes with the gaskets needed for installation and a 12 month warranty.

****PLEASE NOTE THAT THIS IS A BRAND NEW TURBO, NOT A REMAN!!***

CROSS REFERENCE PART NUMBERS

• RE69677
• RE69007
• RE68875
• RE500014
• 177286
• 477286
• 466923-0003
• 466923-9003
• 466923-5003

***You must choose from one of the two core options to purchase this product.***

• Select No Core Charge and you will just be charged the price of the turbo. With this option, your new turbo will not be shipped until we receive a good core from you.
• Select With Core Charge and you will be charged the initial price of the turbo, plus an additional $100 for the core. Your new turbo will be shipped out to you immediately and you will have 30 days to return a good core and receive credit back to your card.

Stock replacement Borg Warner reman turbo. Comes with the gaskets needed for installation and a 12 month warranty.

****Please note that this core is graded!!!****

CROSS REFERENCE PART NUMBERS

• RE69677
• RE69007
• RE68875
• RE500014
• 177286
• 477286
• 466923-0003
• 466923-9003
• 466923-5003

***You must choose from one of the two core options to purchase this product.***

• Select No Core Charge and you will just be charged the price of the turbo. With this option, your new turbo will not be shipped until we receive a good core from you.
• Select With Core Charge and you will be charged the initial price of the turbo, plus an additional $350 for the core. Your new turbo will be shipped out to you immediately and you will have 30 days to return a good core and receive credit back to your card.