BK Diesel Service - STX540

Case IH Tuning Chip: Power Manager Performance Downloader

**THIS CASE IH TUNING CHIP WILL WORK ON MOST CASE IH ELECTRONIC MACHINES, NOT JUST TRACTORS!! CALL US TODAY TO SEE WHAT WE CAN DO FOR YOU!!**

Finally, a Case IH tuning chip with custom tuning is now available to the ag market! This custom Case IH tuning chip comes with a touch screen handheld unit that holds the original stock file plus two custom written files specifically calibrated to your machine! This is nothing like the standard pressure box chips you are used to dealing with. You will notice a significant difference in switching from a standard box chip to this new tuner! Using this tool will give you the power and fuel economy that you always wanted from your machine and all while doing it safely!

Use less fuel per acre Complete more acres per hour No need to purchase bigger machines

Before you buy a new tractor to accommodate the power demands of a new plow, planter, or other implement, you should consider saving money by uprating your current equipment. Up-rating not only adds value and capability to your current tractor, but has a minimal impact to the equipments reliability. Case IH tuning chip with the Power Manager now offers engine up-rates that achieve new power levels without replacing your current tractor, saving you the need to buy a higher powered model.

Our up-rates increase power over the entire operating range of the engine. Usually this allows the use of a higher gear and 2-300 less RPM which translates to fuel savings. Furthermore, the extra power allows for higher ground speed where applicable allowing you to cover more acres per hour.

Reliability is a major concern for us. Weve done engine calibration analysis on all of the models in your series. We know what it takes for the manufacturer to get more power. We use that as our road map to keep powertrains operating within the safe limits set out by the manufacturer for use in their higher end models utilizing similar powertrains. Furthermore, our product has no wires or connectors that will corrode over time. It keeps your tractor looking completely factory stock.

Check out the product demo video by clicking the following link: http://youtu.be/lx_Gt4R9RVM

**********REQUIRED INFORMATION WHEN ORDERING**********

• Machine Year
• Machine Series
• Machine Model Number
• Machine Serial Number
• Machine additional details or setup
• Machine uses what do you use it for the most

**********THIS CASE IH TUNING CHIP WILL NOT WORK ON ALL MACHINES-CALL TO VERIFY YOUR APPLICATION BEFORE ORDERING**********

LED Center Hood Light for Case/IH Magnum, MX, and Quadtrac Tractors. Plug & Play. Light replaces current OEM lights and housing. Durable Poly-carbonate lens and aluminum housing for each attached light.
Replaces OEM Part Numbers: 87455676, 87455677, & 87308895

This Plug & Play kit replaces all four factory headlights in Case/IH Quadtrac Tractors. The TL6150's (center light) puts out 15,000 lumens, 5 times more light then factory. The TL6160's (corner headlights) are design for DOT and EU road travel.
Kit Includes:
2 - TL6150 (Center Headlights)
1 - TL6160L (Left Headlight)
1 - TL6160R (Right Headlight)

LED Light for direct replacement, Plug & Play. Light will bolt right into factory light housing. Replaces OEM Part Numbers: AL209455, 87539115, & 87328621. Will bolt into OEM light housing part numbers: 87455676, 87455677, & 87308895

Left LED Corner Head Light, replaces the entire left headlight on newer magnum tractors. This light features a DOT & E-Marked light pattern, specifically designed for road travel. Plug & Play, Looks & Fits like OEM.
Replaces OEM Part Numbers: 87309029

Right LED Corner Head Light, replaces the entire right headlight on newer magnum tractors. This light features a DOT & E-Marked light pattern, specifically designed for road travel. Plug & Play, Looks & Fits like OEM.
Replaces OEM Part Numbers: 87309030

This on/off switch will allow you to turn your Steinbauer power module on and off to have the power at your fingertips when you need it!

Steinbauer Part Number 200086

INTELLIGENT ENGINE TECHNOLOGY

INCREASED POWER AND TORQUE, USING FUEL INJECTION OPTIMIZATION. PRECISION. ACHIEVED. STEINBAUER.

The desired performance enhancement is achieved by changing the injection duration, the same way the system was originally designed to operate. This also allows precise fuel control throughout the full rpm range of the engine. Injection duration is achieved by adding pulse width to a signal, (i.e. at end of injection). This is not changing timingthats best left to the factory ECU. Our module also does not interfear with common rail pressure making our module the best choice for your engine.

So what is the benefit of all this Intelligent Technology for your vehicle? Our module gives up to an additonal 20% increase in power and torque, giving you greater towing power and making overtaking effortless and safer.

Simply smarter. Simply safer. Simply STEINBAUER.

THERE IS NO SUBSTITUTE FOR QUALITY

WE ARE THE ENGINE ADDITIONAL PERFORMANCE ELECTRONIC SPECIALISTS.CHOOSE THE BRAND THAT YOU CAN TRUST. CHOOSE STEINBAUER.

There are many products on the market today that claim to increase power and torque. Buzz words like chip tuning, chipping or flashing are technologies of the past, products that increase rail pressure are simplistic technology, that provides additional power by increasing rail pressure this can cause major engine failure.

If you are looking for a quality product, that has been tried, tested and sold worldwide then there is only one. STEINBAUER has been producing additional performance electronics for over 15 years, we develop, test and manufacture every product in our range. Quite simply there is no substitute for quality.

• tested & sold worldwide, operating in all climates & conditions
• robust constriction, dust, moisture and vibration resistant
• no interference to existing vehicle parts service intervals remain unchanged.
• quality European engineering and components
• easy installation
• no boost or increase in rail pressure
• backed by a worldwide support network
• 3 year warranty

This module fits many makes and models so if you are not using one piece of equipment, you can simply unplug it and plug it into something else you are using! See the complete list of applications below:

CASE-IH 12.9L Tier 4A / Tier 4B / Tier 4 Final

• 420 Steiger
• 470 Steiger
• 500 Steiger
• 540 Quadtrac
• 550 Steiger
• 580 Quadtrac
• 600 Steiger
• 620 Quadtrac

NEW HOLLAND - 12.7L Tier 4A / Tier 4B / Tier 4 Final

• FR650
• FR780
• T9.530
• T9.565
• T9.600
• T9.615
• T9.645
• T9.670
• T9.700

Stock replacement Garrett turbo. This turbo comes with the gaskets you need for installation and a 1 year warranty.

CROSS REFERENCE PART NUMBERS

• 5801647158
• 5801647158R
• 820803-0004
• 820803-5004
• 820803-9004
• Cursor 13 Motor
• Twin Turbo
• CNH Restricted

Stock replacement Garrett turbo. This turbo comes with the gaskets you need for installation and a 1 year warranty.

CROSS REFERENCE PART NUMBERS

• 5801650196
• 5801650196R
• 5802255528
• 5802255528R
• 820802-0004
• 820802-5004
• 820802-9004
• 820802-0007
• 820802-5007
• 820802-9007
• 820802-0008
• 820802-5008
• 820802-9008
• 820802-0009
• 820802-5009
• 820802-9009
• Cursor 13 Motor
• Twin Turbo
• CNH Restricted